The Sinewave Beacon 2 has you covered for the long haul. It's a dynamo-powered front light and USB charger. Keep the good times (and all your electronic devices) rolling day and night for every long ride you never want to end.
The Sinewave Beacon 2 differs from other dynamo-powered front lights on the market in several ways. First off, it's super efficient, meaning no pedal stroke goes to waste. It starts to deliver flicker free light at a speed of 5-6 km/h, it also can start to charge your USB devices at those low speeds and it delivers as much power as a wall socket at 14.4 km/h, with overcharge protection to save your device's battery from too much input at speeds higher than 35 km/h. With a standard USB plug, it can charge pretty much anything with a USB-compatible charging cord, including GPS devices, bike computers, phones, portable speakers, battery packs, and headlights.
The Sinewave Beacon 2 is compatible with all dynamo hubs. All electronics are potted in epoxy for full weatherproofing and vibration resistance, and the connections are all gold-plated for anti-corrosion protection. The Beacon 2 comes with a 36" wire to connect it to your dynamo hub.
Proudly made in the USA, the Sinewave Beacon 2 Dynamo Light and USB Charger will see you through, no matter how long you're out riding!
- Sinewave Cycles Beacon 2 Headlight and Dynamo USB Charger
- Steady light output, flicker free light down to 5-6kmh
- Integrated USB charger. Charge your phone, GPS or any other USB device directly from the Beacon; no need for a separate charger.
- Flexible power options: An external, off-the-shelf USB battery pack can be connected to maintain bright, flicker-free light even when stopped or riding slowly. Any available dynamo power replaces battery power until reaching a speed when all power is provided by the dynamo and the battery is no longer used.
- 750 Lumens: Lots of light suitable for any style of riding. Symmetrical beam pattern; ideal for off road riding.
- Superior brightness at low and medium speeds: Dynamo power is optimized for low-to-medium speeds, reaching 100 lumens at 8 kph, 375 lumens at 13kph, 600 lumens at 16 kph and 750 lumens at 21 kph.
- Low brightness mode: a reduced brightness mode for situations where full brightness is not needed and for easy power sharing between the light and charger.
- Standlight: A supercapacitor, charged while riding, provides about 5 minutes of standlight when stopped. The standlight can be turned off with the toggle switch.
- A blinking mode is available when using external battery power.
- Mounting Options: The 10mm mounting tab is compatible with mounting hardware from B&M, Supernova, Schmidt, etc.
- Compact design: L x W x H = 58 x 42 x 42 mm. Weight: 115g including 36" dynamo wire.
- Taillight compatibility information can be found here.
- Weatherproof: Designed for use in any conditions. Multiple seals protect against water ingress, electronics are potted in epoxy, and all connectors are gold plated and designed for resistance to the elements.
- 3 year warranty.
- Available in black or silver
- Made in USA
- Beacon 2 Headlight FAQ